Toshiba DK40I Telephone User Manual


 
System & Station
Program 36 Fixed Call Forward
Strata DK Programming 5/00 3-105
System & Station
Program 36 Fixed Call Forward
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Station
Initialized Default: Does not assign a Fixed Call Forward location to any port
Program 36 Overview
Fixed Call Forwarding is different from other station Call Forwarding options. It is fixed in terms
of the destination [PDN] which is assigned in this program. The station user cannot change the
Fixed Call Forward destination, unlike the other station Call Forwarding options. If Fixed Call
Forwarding is set on a station, the station does not ring and all calls forward immediately.
Note Telephones and attendant consoles must have a )L[HG&DOO)RUZDUG button to activate
this feature (See Programs 39 and 59).
   6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor
[PDN] Port
Range
[PhDN] Port
Range
DH Group
Ports
Processor
[PDN] Port
Range
[PhDN] Port
Range
DH Group
Ports
DK14 000~009 500~509 900~915 B1CU 000~055 500~579 900~915
DK40i 000~027 500~527 900~915 B2CAU/BU 000~111 500~739 900~915
RCTUA 000~031 500~531 900~915 B3CAU/BU 000~191 500~739 900~915
RCTUBA/BB 000~079 500~579 900~915 B5CAU/BU 000~335 500~835 900~915
RCTUC/D 000~239 500~739 900~915
RCTUE/F 000~335 500~835 900~915
Port Forward to Tel Port Port Forward to Tel Port Port Forward to Tel Port Port Forward to Tel Port
SELECT = Station Logical Port Number
Enter the port number of the station that
needs a Fixed Call Forward location
assigned.
To add a port range, enter XXXXXX
(low port high port).
FORWARD TO TEL = Port Number
Enter the port number of the [PDN], [PhDN] or
DH [DN] that will be call forwarded to when the
)L[HG&DOO)RUZDUG button is pressed.
[PhDNs] or DH [DNs] can be entered with DK
Release 3.2 and above software only.
Press LED Button 01 to enter blanks.