Filter
Top Products
ISDN
ISDN
Program *62 – Non-ISDN Station Bearer Service
Strata DK Programming 5/00 7-23
Program *62 – Non-ISDN Station Bearer Service
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: System, PRI and BRI
Initialized Default: See below
Program *62 Overview
When Strata DK stations, except ISDN stations, use ISDN facilities, each station needs to be
assigned the type of service expected to be used. The choices are Speech or 3.1 kHz (used for
modem and fax connections). Set the transmission level for outgoing paths for calls. Default value
is -6 db.
Phones marked as “Speech” bearer service can receive calls marked “Speech” or “3.1 KHz audio.”
Phones marked as “3.1 KHz Audio” can only receive calls marked with same bearer service.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Data Pad Level (db) Data Pad Level (db)
00 4-12
1-3 5-15
2-6 6-18
3-9 7+3
*62-1
Bearer
Service
*62-2
Outgoing
Pad Level
*62-3
Incoming
Pad Level
Station Ports
Station Logical Port Number
Enter the port number(s) being defined.
To add a port range, enter XXX
XXX
(low port
high port).
SEL = 1~3
1 - Bearer Service
2 - Outgoing Call
3 - Incoming Call
DATA = Bearer Service (0 or 1)
0 - 3.1 kHz Audio (faxes)
1 - Speech
For options 2 and 3, enter the
Pad Level. See legend below.