Filter
Top Products
Memory
Your fax has a memory which can be used to temporarily store both
incoming and outgoing documents.
♦ Approximately 20 pages of average content can be held in memory
when no voice messages (including outgoing messages) have been
recorded. Less can be held if any pages were scanned using fine or
halftone resolution.
♦ To see the percentage of memory that is currently occupied, press the
START/MEMORY key with no document in the feeder. The
percentage will appear in the display.
Sending documents from memory
With this function, the original document is scanned immediately, stored in
memory, and then transmitted once the connection to the receiving machine
is made. This is convenient when transmitting to places where the line is
often busy, as it saves you from waiting to collect the original document and
frees the feeder for other operations.
♦ Only one memory transmission can be set at a time.
♦ The amount of memory currently occupied appears as a percentage in
the display while the document is being scanned.
1
Load the document(s).
•• Set the resolution and/or contrast if
desired.
2
Press the START/MEMORY key and
then 1.
START/MEMORY
1
RESOLUTION
Memory
84