Filter
Top Products
Direct Call
If desired, you can allow a designated phone number to access a personal box
directly when the answering machine is activated. In this case the caller will
immediately hear the outgoing message of the personal box instead of that of
the general box. You can designate one phone number for each personal box.
Note: This function cannot be used if you are using Distinctive Ring.
1
Press the keys shown at left. "DIRECT
CALL #" will appear in the display.
2
Press 1 to enter a number, or 2 to clear a
number. (If you pressed 2, go to Step 5.)
3
Enter the number of the personal box to
be accessed directly.
4
Enter the phone number, including the
area code, by pressing the number keys
(the number must be 20 digits long).
5
Press the START/MEMORY key and
then the STOP key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function described
in Blocking Reception of Unwanted Faxes in this chapter to prevent voice
calls as well as fax receptions (the Anti Junk Fax function can normally only
prevent faxes).
In this case, when a voice call or a fax transmission comes in from a number
you have specified as a "Junk Number", your fax will break the connection as
soon as it receives the calling phone number from the caller ID service
(before the third ring).
To use this function, set Option Setting 13 to YES as described in Chapter 8,
Option Settings, and then enter the number in the Anti Junk Number List as
explained in Blocking Reception of Unwanted Faxes in this chapter.
FUNCTION
0
1
2
START/MEMORY
STOP
or
5
4 3
7
4
5 3
(Example)
3
(Example: "3" for
personal box 3)
Caller ID
74