Filter
Top Products
(Example)
Other remote operations
After listening to your messages, you can do any of the operations described
below by pressing the appropriate keys on the telephone.
Note: The following commands cannot be entered while messages are
being played back. If you do not want to wait until playback ends to enter a
command, first stop playback by pressing "0" and "#", and then enter the
command.
Changing the fax reception mode
Select a new reception mode by pressing
the keys as follows:
•• ANS. mode: "8", "1", and "#".
•• FAX mode: "8", "2", and "#".
•• TEL mode: "8", "3", and "#".
Caution: In TEL mode, you will not be
able to further change the reception
mode.
•• TEL/FAX mode: "8", "4", and "#".
Recording a new outgoing message
Note: A new outgoing message can only be recorded for the box you
selected at the beginning of the remote operation procedure.
1
Press "4" and " " on the telephone.
2
When you hear a short beep, speak into
the telephone to record the new message.
•• The message (including the general
outgoing message) can be up to 15
seconds long. After 15 seconds (or
earlier if the machine detects silence
after you finish speaking), you will
hear a beep, and the new message will
be played back.
4
1
8
2. Answering
Machine
Remote Operations
43