Filter
Top Products
Transfer Function
The Transfer function is used to make the FO-475 automatically call you at a
specified number every time it receives an incoming message in a selected
box. This allows you to hear your messages immediately after they come in,
even when you are at a remote location.
When you answer the telephone, you will hear your recorded message telling
you that the call is a transfer call. Enter "#", the box number, the box’s
passcode (or your remote code number if the box has no passcode), and "#".
The FO-475 will then play back your messages. You can also perform any of
the remote operations described in Remote Operations in this chapter.
Note: When you hang up after a transfer call, the FO-475 will not
immediately resume normal operation. If you want the FO-475 to accept
calls immediately after a transfer call, enter " " twice before hanging up
(if you want to hang up during message playback, first enter " 0" and " #"
to stop playback, then enter " " twice).
Programming the transfer number
To use the Transfer function, you must first give the FO-475 the number to
call (the transfer number). This is done by pressing the panel keys as follows:
1
Press these keys:
0
FUNCTION
The display will show:
ANS. SETTINGS
2
Press these keys:
The display will show:
TRANSFER # ENTRY
2. Answering
Machine
Transfer Function
33