Filter
Top Products
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes from
parties which you specify. This saves paper by not printing out unwanted
"junk" faxes.
To use this function, first turn it on by setting Option Setting 13 to YES as
described in Chapter 8, and then enter the fax numbers from which you do
not want to receive faxes as shown below.
Comments:
•• The call will be terminated by the fax, however, the connection will remain
until the caller hangs up or the line times out.
•• Up to 5 numbers can be entered in the Anti Junk Number List.
•• The Anti Junk function will not operate for a number which has been stored
as a priority or direct call number.
•• To clear a number from the Anti Junk Number List, you need to know the
1-digit number which identifies it. If you have forgotten this number, print
out the Anti Junk Number List as described in Chapter 9.
1
Press the keys shown at right.
STORE JUNK # will appear in the
display.
2
Press 1 to store a number in the Anti Junk
Number List, or 2 to clear a number from
the list.
or
3
Storing: Enter a 1-digit number from 1 to
5. This number identifies the fax/voice
number you will store in the next step.
Clearing: Enter the number which
identifies the fax/voice number you want
to clear, and go to Step 5.
(Example)
FUNCTION
3
1
2
1
7. Special Func-
tions
Blocking Reception of Unwanted Faxes
77