Filter
Top Products
Remote Operations
You can call the FO-475 from any tone dial telephone and play back your
messages using the remote commands. You can also use these commands to
change the reception mode and other settings.
Remote code number
When you call the FO-475, you must enter the passcode for the box you want
to listen to, or a remote code number if the box does not have a passcode.
One remote code number can be programmed, and it is used to access all
boxes which do not have passcodes. This prevents unauthorized people from
listening to your messages. You can use any 3-digit number as the remote
code number.
The remote code number has been set to "001" at the factory. If you want to
change it, press the panel keys as shown below.
1
Press these keys:
0
FUNCTION
The display will show:
ANS. SETTINGS
2
Press these keys:
The display will show:
REMOTE CODE
3
Enter a 3-digit number by pressing the
number keys. ("1","2" and "3" cannot be
selected for the first digit.)
4
Press the START/MEMORY key and
then the STOP key.
(Example)
2 2
STOP
START/MEMORY
2
Remote Operations
38