Filter
Top Products
PROGRAMMING METHODS
Data may be entered and changed in the SVMi-4 by three methods. These are,
The screen Interface, DTMF system administration and DTMF subscriber adminis-
tration.
The Screen Interface
Most of the programming is achieved using a PC attached to the SVMi-4 serial
port. This makes use of a graphical user interface, and is considered necessary
for initial set up.
KNOWLEDGE REQUIREMENTS
A general knowledge of PC’s an windows is required. Some understanding of
serial port communications is advised.
EQUIPMENT REQUIREMENTS
● A Windows PC running Hyper Term (or equivalent) is needed. You will also
require a serial cable with straight trough wiring. If you already have a cable for
programming the Samsung CADENCE card, you can use this.
● A Compact Flash PC card adapter is required if you plan to perform a system
Programming - Page 41