Filter
Top Products
Conference Calls - Y/N Allows SVMi-4 to place a conference call to the sta-
tion controlled by the Station Block.
Message W
aiting Indicator Controls
Dial To Set MWI On Enter the string needed to turn message waiting indica-
tors on (see the company’s PBX system reference manual for this parameter).
Dial To Set MWI Off Enter the string needed to turn message waiting indica-
tors off (see the company’s PBX system reference manual for this parameter).
Call Pr
ogress Training
Ringing Number Enter any string returned by the phone system to indicate
ring. The second field indicates how many times the Train routine is to be run
using the number entered in the first field.
Busy Number Enter any string returned by the phone system to indicate busy.
The second field indicates how many times the Train routine is to be run using
the number entered in the first field.
Retrain - Y/N Set to ‘Y’ to preserve the original values. Set to ‘N’ to clear.
Retrain – Train To run the Call Progress Train routine, enter a telephone num-
ber in either the ringing number field, the busy number field, or both fields.
Specify the number of times SVMi-4 is to try the number to gather data. Press
Programming - Page 106