Samsung ITP-5121D IP Phone User Manual


 
7. OUT CODE SETUP
8. NETWORK INFO: Provides all IP network related information.
MY PHONE
Used to personalize your keyset.
1. MY NAME:Enters the user’s name on the phone.The name registered here is
displayed on the LCD screen od the opponent’s phone when making an inter-
nal call.
2. LANGUAGE: Sets a language between Korean and English
3. CHANGE PASSWORD: Changes the four-digit password that can lock the
phone from use.
4. LOCKED: Sets the lock status of the phone. This will restrict access to the
phone.
UNLOCKED: Full Access.
LOCKED OUT:Restricts outgoing calls.
LOCK ALL: Restricts complete access to phone.
5. PRIVATE LIFE PROTECTION: Retricts access to the MENU button using a
password.
6. PHONE VERSION: Displays the software version of the telephone.
7. RESET TO DEFAULT:Removes the data (phone number,messages) set by the
user and defaults the phone.
69
4. AOM PAGE SETUP
5. DIAL MODE:Select dial type options.(enblock-requires SEND button to com-
plete the call, or overlap - direct out dial)
Scroll to or dial 9, press ENTER.
Scroll LEFT/RIGHT to select desired display option.
Press ENTER, display confirms save.
6. STATION ON/OFF: Turn various features/functions on/off in the keyset.
These features are:
AUTO HOLD: When on an outside call,pressing a line button,route button or
flashing CALL button will automatically put your call on hold and connect
you to the next call.
AUTO TIMER: Timer in LCD that monitors call duration.
HEADSET USE: Switches between headset and handset use.
HOT KEYPAD: Allows for dialing without lifting handset first.
PAGE REJOIN: Allows remaining portion of internal page to be played
through keyset speaker, after handset is replaced.
RING PREF: Allows for automatically answering of calls when handset is lift-
ed.(Does not require button press)
AME PASSWORD: Allows password protection of AME feature on set. This
prevents unauthorized listening to messages being left.
AUTO CAMPON: Allows intercom calls to be automatically camped on to,
when a busy station is called.
DIS SPDNAME: Allows the speed dial associated name to be displayed while
number is being dialed.
SECURE OHVA: Allows OHVA calls to be received by station in conversation
on handset.
CALL COST DISP: Display in LCD that monitors call cost, for duration of call.
CID REVIEW ALL: Allows user to review Caller ID information for calls sent to
the station.The list is programming dependent and operates on a first in first
out basis. Calls to displayed numbers can be returned with a single button
press,provided LCR is being used.
STOP CID DISPLAY: Discontinues CID information after call is answered.
AUTO ANS CO CALL: Allows CO calls to be auto answered on incoming calls.
Scroll to or dial 0, press ENTER.
Scroll to desired feature, press ENTER to change option status.
Press CANCEL to enter change and return to main Configuration menu.
68
Home Page
Table of Contents
ITP-5112L