Samsung ITP-5121D IP Phone User Manual


 
45
DISPLAY FEATURES
INTERACTIVE DISPLAY KEYS
The three keys below the display are substitutes for dedicated feature keys and ac-
cess codes. Pressing one of these buttons has the same effect as pressing a pro-
grammable button. These buttons are called soft keys as their functions are not
fixed.They change to present you with the best options for that call condition.The
use of soft keys allows the programmable buttons to be used for more DSS and
speed dial buttons.
The SCROLL button is used to display options available to the user at a particular
time or during a specific procedure. Press this button once while in the idle state
to view the three main categories available.
201: STN NAME
CALL OTHER ANS
ANSWER: Guides you through the options to answer calls.
OTHER: Guides you through features other than making or answering calls.
CALL: Guides you through the options to make a call.
Select one of the main categories: CALL, OTHER or ANS (ANSWER). Press the
SCROLL button to display additional options available under each of the three
main categories.The symbol displayed as the last character on the lower line of
the display indicates that there are additional options.Press the SCROLL button to
display these additional options.
User instructions will be displayed in lower case letters. Options assigned to soft
keys will be in upper case letters.
DIRECTORY INFORMATION
An 11 character directory name can be assigned to each extension number.
Display keyset users can view the name of the called or calling station before an-
swering.
Each outside line can have an 11 character directory name. Incoming calls can be
easily identified and answered with different greetings.
Outside and internal calls ringing to a station group will display [CALL FOR xxx]
where xxx is the station group number.This allows you to answer calls directed to
you differently than calls directed to your group.
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer (see SET ANSWER MODE).
While on hook, press TRANSFER and then dial 110.
Dial 151 to turn Auto Answer CO on or 150 to turn it off.
Press TRANSFER to store your selection.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
With you handset on-hook, press TRANSFER and then dial 110.
Press 111 to turn DISP SPDNAME on or 110 to turn it off.
Press TRANSFER to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in,first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer.When reviewing this list,you can press one button to dial the
person back.The system must be using LCR to dial the stored number.
With you handset on-hook, press TRANSFER and then dial 110.
Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
Press TRANSFER to store your selection.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
With you handset on-hook, press TRANSFER and then dial 110.
Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.
Press TRANSFER to store your selection.
44
Home Page
Table of Contents
ITP-5107S