Filter
Top Products
OfficeServ 7100 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 APRIL 2007
1.23
1.18 CALLER ID DISPLAY
The station user can change the order in which the CLI, Caller ID and/or ANI
information is displayed on an LCD set during a transferred call.
CLI display options are the following:
0. NO DISPLAY No CLI data will be displayed.
1. NUMBER FIRST The CLI number received from the Central Office will be
displayed first.
2. NAME FIRST The CLI name received from the Central Office will be
displayed first.
Caller ID display options are the following:
0. NO DISPLAY No CID data will be displayed.
1. NUMBER FIRST The CID number received from the Central Office will be
displayed first.
2. NAME FIRST The CID name received from the Central Office will be
displayed first.
ANI display options are the following:
0. NO DISPLAY No ANI data will be displayed.
1. NUMBER FIRST The ANI number received from the Central Office will be
displayed first.
2. NAME FIRST Since there is no name sent by the Central Office, The only
time you will receive a name is when your service company
has programmed a name to be associated with the number
otherwise your display will read “no ANI name”.
ACTION DISPLAY
1. Press the transfer key followed by 119
Display shows
[201] CID DISP
NUMBER FIRST
Home Page
Table of Contents