Filter
Top Products
MENU STRUCTURE
The IP SETUP MENU is configured as follows:
1. INFORMATION
1. Version
2. Network
3. Load Option
4. MAC Address
2. NETWORK
1. Mode
2. IP
3. Netmask
4. Gateway
Note that items 2 to 4 are only displayed when setting Manual IP.
3. LOAD & UPGRADE
1. Load Option
2. Upgrade Program
3. Upgrade Bootrom
4. Format
4. SYSTEM
1. Password
5. SERVER
1. Server IP
2. ID
3. Password
6. EXIT
IP SETUP MENU
To enter the IP SETUP MENU, press the MENU button as soon as the ITP-5021D
phone is connected to the power supply.
When entering the IP setup menu, the LCD displays the following options:
Other items not shown on screen:
Once the IP SETUP MENU is displayed,you can move to each menu in the Set Up
by using the navigation buttons or the [1]-[9] dial buttons of the ITP-5021D IP
phone.
• The UP and DOWN directions buttons in the navigation button assembly are
used to move the highlighted bar up or down to the desired option.
• The LEFT and RIGHT buttons in the navigation button assembly are used to
move the highlighted bar left or right, to the desired option, move to a sub
menu and if a menu is at the last line,that menu option will be executed.
• The [0]-[9] dial buttons are used to directly choose a menu, or sub menu
options.
• The [ENTER] button in the navigation button assembly is used when saving
a modification.
• The [MENU] button in the navigation button assembly is used to to display
the IP Setup Main Menu.
•The[END] button in the navigation button assembly is used when canceling
or editing the modification, or existing programming.
•The[CANCEL] button in the navigation button assembly is used to go back
to the previous screen or to delete the last digit of a displayed option value.
>1.Infomation
2.Network
3.Load & Upgrade
4.System
5.Server
6.Exit
10
11
Home Page
ITP-5021D
Table of Contents