Filter
Top Products
9. DIAL MODE:Select dial type options.(enblock-requires SEND button to com-
plete the call, or overlap - direct out dial)
• Scroll to or dial 9, press ENTER.
• Scroll LEFT/RIGHT to select desired display option.
• Press ENTER, display confirms save.
0. STATION ON/OFF: Turn various features/functions on/off in the keyset.
These features are:
AUTO HOLD:When on an outside call, pressing a line button,route button or
flashing CALL button will automatically put your call on hold and connect
you to the next call.
AUTO TIMER: Timer in LCD that monitors call duration.
HEADSET USE: Switches between headset and handset use.
HOT KEYPAD: Allows for dialing without lifting handset first.
PAGE REJOIN: Allows remaining portion of internal page to be played
through keyset speaker, after handset is replaced.
RING PREF: Allows for automatically answering of calls when handset is lift-
ed.(Does not require button press)
AME PASSWORD: Allows password protection of AME feature on set. This
prevents unauthorized listening to messages being left.
AUTO CAMPON: Allows intercom calls to be automatically camped on to,
when a busy station is called.
DIS SPDNAME: Allows the speed dial associated name to be displayed while
number is being dialed.
SECURE OHVA: Allows OHVA calls to be received by station in conversation
on handset.
CALL COST DISP: Display in LCD that monitors call cost, for duration of call.
CID REVIEW ALL: Allows user to review Caller ID information for calls sent to
the station.The list is programming dependent and operates on a first in first
out basis. Calls to displayed numbers can be returned with a single button
press,provided LCR is being used.
STOP CID DISPLAY: Discontinues CID information after call is answered.
AUTO ANS CO CALL: Allows CO calls to be auto answered on incoming calls.
• Scroll to or dial 0, press ENTER.
• Scroll to desired feature, press ENTER to change option status.
• Press CANCEL to enter change and return to main Configuration menu.
69
4. Handset : Sets handset receive volume level.(8 volume levels)
5. Speaker: Sets station speaker volume level. (16 volume levels
6. Broadcast:Voice Announce feature volume. (16 volume levels)
CALL FORWARD
See Tr
ansferring Calls Sec
tion,Forwarding Calls.
CONFIGURATION
1. PASSWORD: See Customizing
Your Keyset Section, Change your Passcode.
2. LOCK: Station Lock programming. See Convenience Feature Section, Locking
Your keyset.
3. ANSWERING MODE: See Customizing Your Keyset Section, Station Answering
Mode P
rogramming.
4. BOSS ANSWERING: Allows setting of ring type for Bosses station, from
Secretary station.
• Scroll to or dial 4, press ENTER.
• Scroll LEFT/RIGHT to select desired Bosses RING TYPE setting. (Ring,
Automatic, Broadcast(voice announce).
• Press ENTER, display confirms save.
5. LANGUAGE: Select station display language programming.
• Scroll to or dial 5, press ENTER.
• Scroll LEFT/RIGHT to select desired display language.
• Press ENTER, display confirms save.
6. CID DISPLAY: Select station incoming CID information display.
• Scroll to or dial 6, press ENTER.
• Scroll LEFT/RIGHT to select desired display option.
• Press ENTER, display confirms save.
7. ABSENT MESSAGE: S
ee Paging and Messaging Section.
8. INTERNAL CALL: Select incoming information display from internal caller.
(Number or Name)
• Scroll to or dial 8, press ENTER.
• Scroll LEFT/RIGHT to select desired display option.
• Press ENTER, display confirms save.
68
Home Page
ITP-5012L
Table of Contents