Filter
Top Products
From the LCD:
• Press MENU button.
• Scroll to CONFIGURATION option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 and imme-
diately enter the option.
• Scroll to RING PREF, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer.When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer (
see Set Answer Mode).
• Press MENU button.
• Scroll to CONFIGURATION option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 and imme-
diately enter the option.
• Scroll to AUTO ANS CO CALL, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work.Lines ringing a station group will not cause your phone to Auto Answer the
call.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 111 to turn DISP SPDNAME on or 110 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to CONFIGURATION option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 and imme-
diately enter the option.
• Scroll to DISP SPDNAME, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in,first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer.When reviewing this list, you can press one button to dial the
person back.The system must be using LCR to dial the stored number.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to CONFIGURATION option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 and imme-
diately enter the option.
• Scroll to CID REVIEW ALL,press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Scroll to CONFIG and press ENTER—OR—you may press 0 and immediately
enter the option.
• Scroll to AUTO CAMP-ON and press ENTER to change status.
• Press CANCEL to return to option Main Screen.
• Press the MENU button—or press the END to return to idle screen.
5554
Home Page
ITP-5012L
Table of Contents