Filter
Top Products
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK before you begin dialing.
AUTO CAMP-ON
When you want to automatically camp on to a busy station without pressing the
camp on button every time you call a busy station,you can set your phone for auto
camp-on.
• With the handset on-hook, press TRSF and then dial 110.
• Dial 081 to turn on auto camp-on or 080 to turn it off.
• Press TRSF to store your selection.
CALLING YOUR SYSTEM OPERATOR
• Dial 0 to call your system operator or group of operators.
• If you want to call a specific operator, dial that person’s extension number.
NOTE:If the Hot Keypad feature has been turned off,you must first lift the handset
or press SPK before you begin dialing.
15
AUTO ANSWER MODE
When another station calls you,your keyset will sound a brief attention tone and
then automatically answer the call.
• Your microphone and speaker are turned on and you can speak handsfree.For
privacy, use the handset. If you are using a 7B phone you must pick up the
handset to speak to the calling party.
• To finish the call, replace the handset or press the ANS/RLS or the MONITOR
key if you are using a 7B phone.
NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
• Press the CBK key or dial 44.
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press ANS/RLS to call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds.If you have set a
callback, your CBK key will light.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want to
wait for a callback:
MANUAL CAMP-ON
• Press the CAMP key or dial 45.
• The called station will receive off-hook ring tone repeated every few seconds
and its first available CALL button will flash green to indicate your call is wait-
ing.
• Wait for the called party to answer.
• The called station must release its first call or place it on hold before answering
your camp-on.
NOTES:
1. If you receive No More Calls tone, that station has no available key to accept
your call. Hang up or leave a message.
14
Home Page
Table of Contents
DCS Keyset