Filter
Top Products
NAVIGATING THE MENUS
When programming within various menu options,information can be entered via
the dial pad keys using [0]-[9] and [] dial keys, as well as utilizing the navigation
button assembly.
The button used for editing and their features are summarized below.
BUT
TON
FEATURES
Left and Right ......................To move a cursor (highlighted area) or to erase what is
entered.
Enter ........................................To save the current setting and end programming.
End............................................To cancel the current programming and return to the
Main Menu.
Cancel......................................To move back to the previous screen or delete the last
digit of the displayed option value.
[] ............................................To enter [.] between IP address fields.
[0]-[9] ......................................To enter numerical values.
SETTING THE NETWORK PARAMETERS
Utilize the following programming steps to program the ITP-5012L IP keyset to
operate within the users network.
Network Parameter Setup
From the Setup,Main Menu,select [2.Network] to
set or modify the network parameters. The LCD
will display the Network (1/1) screen.
Press ENTER and you will see the Mode (1/2)
screen.
•If [1. Manual IP] is selected, the user must
enter the IP address, subnet mask, and gate-
way value for the customer network that the
5012L resides on.
•If[2. DHCP] is selected, the IP address, subnet
mask, and gateway value will be set to the
default values automatically. (Choose this
option only if a DHCP server is available on the
local network).
12
Network (1/1)
1.Mode
Mode (1/2)
1.Manual IP
2.DHCP
Setting IP Manually
If [1. Manual IP] is selected the Network (1/4) sub
menu will be displayed.
The user directly enters the IP address, subnet
mask, and gateway, address as follows:
• If the [2.IP] menu is selected,the LCD will display
the following message and the user can enter its
IP address.
Check if there is any currently saved IP address of the phone on the LCD. If the IP
address has not been set, the LCD displays nothing. The user can enter the IP
address using [0]-[9] dial buttons and [] button can save that IP address by press-
ing the [Enter] button of navigation button assembly.
• If the [3.Netmask] menu is selected,the user can
enter a new Netmask IP address.
Check if there is any currently saved subnet mask address of the phone on the
LCD. If the subnet mask address has not been set, the display will show nothing.
Press any dial buttons from [0]-[9] and [] button to enter the subnet mask IP
address and then save that subnet mask IP address by pressing the [Enter] button
of navigation button assembly.
• If the [4. Gateway] menu is selected the user can
enter a new gateway address.
The user can check if there is any gateway IP address of the phone that is current-
ly saved on the LCD.If the gateway IP address has not been set, the LCD will show
nothing. Use any dial buttons from [0]-[9] and [] button to enter the gateway IP
address and save it by pressing the [Enter] button of navigation buttons.
NOTE: In the [2. Network Menu], [1. Mode] option, when [2. DHCP] is selected the
IP address,Netmask, and Gateway will not be displayed on the LCD.
Network (1/4)
1.Mode
2.IP
3.Netmask
4.Gateway
* Input IP Address
xxx.xxx.xxx.xxx
* Input Netmask
xxx.xxx.xxx.xxx
* Input Def. Gateway
xxx.xxx.xxx.xxx
13
Home Page
ITP-5012L
Table of Contents