Filter
Top Products
11
• The [0]-[9] dial buttons are used to directly choose a menu, or sub menu
options.
• The [ENTER] button in the navigation button assembly is used when saving a
modification.
• The [MENU] button in the navigation button assembly is used to to display
the IP Setup Main Menu.
•The[END] button in the navigation button assembly is used when canceling
or editing the modification, or existing programming.
•The[CANCEL] button in the navigation button assembly is used to go back to
the previous screen or to delete the last digit of a displayed option value.
MENU STRUCTURE
The IP SETUP MENU is configured as follows:
1. INFORMATION
1. Version
2. Network
3. Load Option
4. MAC Address
(Note that Option 3 will be indicated only when setting the Manual IP)
2. NETWORK
1. Mode
2. IP
3. Netmask
4. Gateway
(Note that Option 2 will be indicated only when setting the Manual IP)
3. LOAD & UPGRADE
1. Load Option
2. Upgrade Program
3. Upgrade Bootrom
4. Format
4. SYSTEM
1. Password (Unused)
5. SERVER
1. Server IP
2. ID
3. Password
6. EXIT
ITP-5012L SETUP
INITIALIZING THE ITP-5012L
Initially the ITP-5012L IP keyset will need to be setup to operate within the users
network.The Setup Menu is also used to make changes to the keyset,in the event
that the system information should change. The option chosen via scroll button
will be highlighted.
The station numbers will be automatically set by the iDCS 500 system once the
necessary information has been entered into the IP keyset.Enter ID and password
of the server,as described below to register the phone.
See your system administrator for specific Network and Server addresses. The
addresses necessary to set up the ITP-5012L are:
• IP Address of Station
• Network Gateway Address
• iDCS 500 MCP2 Server Address
• User ID
• Password
As soon as the ITP-5012L IP phone is connected to the power supply, press the
MENU button and the LCD displays the SETUP OPTIONS SCREEN.
IP SETUP MENU
To enter the IP SETUP MENU, press the MENU
button as soon as the ITP-5012L IP phone is con-
nected to the power supply. Unplug the power
from the ITP. Press and hold the MENU button
while plugging in the power, then release the
MENU button.
Once the IP SETUP MENU is displayed, you can
move to each menu in the Set Up by using the
navigation buttons and [1]-[9] dial buttons of the
ITP-5012L IP phone.
• The UP and DOWN directions buttons in the navigation button assembly are
used to move the highlighted bar up or down to the desired option.
• The LEFT and RIGHT buttons in the navigation button assembly are used to
move the highlighted bar left or right, to the desired option, move to a sub
menu and if a menu is at the last line,that menu option will be executed.
Setup (1/6)
1.Information
2.Network
3.Load & Upgrade
4.System
5.Server
6.Exit
10
Home Page
ITP-5012L
Table of Contents