Filter
Top Products
The Integrated Answering Device
57
NEW MESSAGE LED
The new message LED on the handset is
designed to work with your answering
system. The LED flashes when you have
new messages in your answering system.
The LED stops flashing when all new
messages are played back
Answering System Settings
To set the following seven functions you
must enter the menu mode. Ô
Setting the Time
Follow these steps to set the clock on the
answering system to the correct time.
Ô
1. Press
CLOCK/MENU
.
2. Press
SKIP/SELECT
or
REPEAT/SELECT
until the correct
day is announced and the
corresponding number (from
1
Sunday
to
7
Saturday) appears.
3. Press
SET
to select the day.
4. Press
SKIP/SELECT
or
REPEAT/SELECT
until you hear the
correct hour setting.
The numbers
1
through
12
appear on
the base as each hour is announced.
5. Press
SET
to select the hour.
6. Press
SKIP/SELECT
or
REPEAT/SELECT
until you hear the
correct minute setting.
The numbers
00
through
59
appears
on the base as each minute is
announced.
7. Press
SET
to select the minute.
Ô
NOTES
Ô
Answering System
Settings
• For your convenience,
voice prompts will guide
you through the menu
setup mode.
• A confirmation tone
sounds to indicate
standby mode.
• You can also set these
menus from the handset.
See “Answering System
Setup” on page 24 for
instructions.
Setting the Time
Time stamp will not be
heard until you have set the
time.