Filter
Top Products
Expanding Your Phone
52
Intercom
1. Press
INTCM/HOLD
in standby mode.
2. Select the handset you want to talk with
from the selection list within 30
seconds. To select the handset, press
CID/VOL/
or
REDIAL/P/
, and then
press the
OK
key. If you select
All
, all
handsets will be paged. An intercom
tone sounds.
To Cancel intercom press the
CANCEL
soft key on the initiating handset.
3. On the receiving handset to answer the
call, press
TALK/FLASH
, the
ANSWER
soft key or
INTCM/HOLD
. Or press any
number key,
/TONE/<
or
#/>
(when
Anykey Answer is on), or pick up the
handset from the cradle (when
AutoTalk is on).
4. To hang up the intercom call, press
END
or the
END
soft key on either
handset.
Call Transfer Feature
From handset to handset
1. During a call, press
INTCM/HOLD
on the
handset.
The line soft key (
LINE1
or
LINE2
) to be
placed on hold will flash. The Call will
be put on hold.
2. Select a handset to transfer the call within
ten seconds. (Refer to step 2 in the
intercom section on page 52).
The call will automatically be placed on
hold, and an intercom tone sounds.
To cancel the transfer, press
TALK/FLASH
or
SPEAKER
on the
initiating handset.