Filter
Top Products
Using Your Phone
35
M
UTE
M
ICROPHONE
You can temporarily mute the microphone
so that the caller cannot hear you. Press
MUTE
during talk mode (while the phone
is in use) to mute the microphone.
Mute On
and appear in the display. To
cancel muting, repeat above step again
when Mute is set to on,
Mute Off
appears.
T
ONE
D
IALING
S
WITCH
O
VER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-
over to tone dialing during the call. This
feature is useful when you need tone dialing
to use automated systems, for example,
entering your bank account number after
you have called your bank. Ô
Initially make your call with the pulse dialing
mode. Once your call connects, press
/TONE/<
. Enter the desired number. These
digits will be sent as tone dialing. Once the
call ends, the tone mode is canceled and
pulse dialing mode resumes.
T
RAVELLING
O
UT
-
OF
-R
ANGE
During a call, as you begin to move your
handset too far from your base unit, noise
may increase. If you pass the range limits of
the base unit, you will hear a beep and see
Out of Range
on the display, and then
the handset returns to standby mode.
P
RIVACY
M
ODE
Privacy mode prevents interruption from
another handset. This works only when
the phone is in use.
While on a call, press the
MENU
soft key on
the handset. use
CID/VOL/
or
REDIAL/P/
to select
Privacy Mode
, and then the
OK
soft key.
Ô
NOTES
Ô
• The tone feature only
applies when the dial
mode is set to pulse.
This special number can
be stored in a memory
location.
• This is referred to as
Chain Dialing (see
“Testing Stored
Emergency Numbers”
on page 44).
• If another handset is in
Privacy Mode, you
cannot join the call. If
someone is using the
handset in Privacy
Mode,
Unavailable
appears in the display
when you try to join the
call.