Filter
Top Products
Expanding Your Phone
51
When
Registration Complete
is
displayed, the handset has been
registered to the base. If
Registration Failed
appears,
please try these steps again.
U
SING
THE
D
IRECT
L
INK
M
ODE
To use this feature, you must enter the two
handsets into the DirectLink mode first. Ô
To enter the DirectLink mode, see “Using
DirectLink Mode” on page 17.
DirectLink call
1. When the phone is in the DirectLink
standby mode, press the
DirectLink
soft
key.
2. Select the handset to which you wish to
DirectLink with by pressing the number
keys (
1
-
2
). Your handset will then page
the other handset.
3. On the receiving handset, press
TALK/FLASH
, the
ANSWER
soft key or if
Anykey Answer is on, press any
number key,
/TONE/<
or
#/>
.
4. When you finish your conversation,
press
END
or the
END
soft key on either
handset. Return the handset to the
cradle, or press the
CANCEL
soft key
and then the
OK
soft key (cancelling
DirectLink mode).
I
NTERCOM
/C
ALL
T
RANSFER
F
EATURE
Intercom and Call Transfer features are
available for your phone. Ô
Ô
NOTE
Ô
Handsets can be in Direct
Link mode while another
handset is in use.To use the
43-3705, register it to the
original base.
Ô
NOTES
Ô
• If the party is busy or out
of range, the handset
returns to standby mode.
• If any of the following
occurs while selecting
the another handset, the
operation will be
canceled.
-Press TALK/FLASH
or SPEAKER.
-Receive an outside/
intercom call or page.
• When the party does not
answer within one
minute, the operation is
canceled.