Filter
Top Products
Setting Menu Options
18
confirmation tone, and
DirectLink
Mode Complete
appears.
3. To return to normal mode, press the
CANCEL
soft key and then the
OK
soft
key, or return the handset to the cradle.
Room Monitor
This feature allows you to monitor sounds in
another room. Place the handset in the
room you wish to monitor; it will function as
a microphone. A second handset can be set
to function as a remote speaker, allowing
you to monitor sounds in the room. Ô
Using Room Monitor
1. Press the
MENU
soft key and select the
Room Monitor menu.
Listen to;
appears.
2. Select the handset you want to monitor
by using
CID/VOL/
or
REDIAL/P/
.
3. Press the
OK
soft key.
Monitoring
appears, and you hear
sounds in the room where the handset
is installed.
4. To turn off the Room Monitor, press the
END
soft key, or
END
.
Handset Setup
The following submenu options must be set
separately for each handset.
Selecting a Telephone Line
TEL-LINE allows you to set default
telephone line. The line you select will be
used when you make a call. If you select
Auto, the phone will default to whichever
line is currently free.
1. Press the
MENU
soft key. Select the
Handset Setup menu, and then the Set
TEL-LINE submenu.
Ô
NOTES
Ô
• You must have two
handsets to use Room
Monitor feature.
• This feature only works
when the handset is
within the range of the
base.