Filter
Top Products
Using Your Phone
31
4. Dial the number.
OR
1. Remove the handset from the base.
2. Dial the number.
If pause is required, press
REDIAL/P/
.
P
appears in the display, which
represents a pause.
3. Press
TALK/FLASH
. The phone will
automatically select a free line. To
select a particular line, press the
LINE1
or
LINE2
soft key.
From the Handset Speakerphone
1. Remove the handset from the base.
2. Press
SPEAKER
.
3. Listen for the dial tone.
4. Dial the number.
5. When the other party answers, talk into
the microphone.
R
ECEIVING
A
CALL
1. Remove the handset from the base. (If
AutoTalk is on, the phone will
automatically answer the call when you
pick it up.)
2. Press
TALK/FLASH
or the
corresponding soft key
(LINE1
or
LINE2
).
OR
If the handset is off the base, press
TALK/FLASH
or the correspond soft key
(
LINE1
or
LINE2
). If Any Key Answer is
on, you can also press any number key.
Ô
NOTES
Ô
• To set Autotalk, see
“Setting the AutoTalk” on
page 21 or to set Anykey
Answer see “Setting the
Anykey Answer” on
page 21.
• The handset microphone
is located at the bottom
of the handset.
• For best performance,
use the speaker phone
in a quiet room and let
the caller finish speaking
before you speak. If you
or the other party has
difficulty hearing, adjust
the speaker volume.
• To have the phone
select Line1 or Line2
instead of a free line, set
the default telephone
line (see page 18).