Filter
Top Products
Chapter 7: Peripheral Devices & Accessories
Cleaning The CH1000 Vehicle Cradle
268 Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
7.9.4 Cleaning The CH1000 Vehicle Cradle
• Use only mild detergent or soapy water on a slightly damp cloth to clean the CH1000.
Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is
susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and
gasoline. The plastic slowly decomposes in strong alkaline solutions.
• To clean ink marks from the label, use isopropyl alcohol.
7.10 The Powered Vehicle Cradle – Model No. CH1005A
The CH1005A Powered Vehicle Cradle (12-24 VDC) is designed to securely grip the Ikôn
when locked in and provides an easy single-handed release mechanism when the Ikôn needs
to be quickly removed from the cradle. The cradle design permits access for the DC input
cable to connect to the Ikôn (see Figure 7.14 on page 274). The cradle is also equipped with:
• One USB A connector.
• LED charge indicator.
• A stylus holder and tether latch.
• Built in speaker, identical to the one on Ikôn, that offers hands-free functionality. The
powered cradle detects when the Ikôn is docked and can automatically transfer the
speaker function from the Ikôn to the cradle.
• Depending on the cradle variant, there can be up to two full RS-232 connectors.
- PN 1081148-500: no RS-232 connectors.
- PN 1081148-400: one RS-232 connector.
- PN 1081148-200: two RS-232 connectors.
The cradle comes with four mounting screws and a CH1005A Powered Cradle Quick Start
Guide (PN 8000164), with illustrated electrical and mounting instructions.
Before Psion Teklogix releases a product, our engineering team exposes that product
through a series of severe testing to ensure that it will survive in the rugged environments in
which our products are typically used. These tests usually include shock and vibration
testing as well as IP testing for water and dust, electrical shock, etc.
If a third party vehicle mount is used, the third party should perform the same type of testing
in order to ensure that the design will maintain the factory specifications of the product. If
the third party company is unwilling to perform the necessary testing and take responsibility
Important: Dampen a soft cloth with mild detergent to wipe the unit clean.