Filter
Top Products
Chapter 3: Using the Advanced Features of Your Phone
63
To allow or disallow PTT broadcasts to play during an active call:
1 Press the Menu key, then select Settings > Basic > Preferences > Paging/PTT Configuration >
PTT Push to Talk.
2 From the PTT Channel Configuration screen, use the down arrow key to locate Accept While Busy,
then press the Select key.
3 From the Accept While Busy screen, use the Left or Right arrow key to select Enabled or Disabled,
then press the Ok soft key.
The default setting is Disabled. When enabled, your phone will accept and play broadcasts while you’re
in an active call. When disabled, your phone won’t play broadcasts while you’re in a call, but will hold
them instead.
Group Paging Mode
Your system administrator may enable your phone to operate in a broadcast mode called Group Paging
mode. In this mode, you broadcast one-way announcements to a specified group of phones, called a
Paging Group. In Group Paging mode, users must subscribe to Paging Groups to send and receive pages.
Sending and Receiving Pages
To send and receive pages, you need to subscribe to certain Paging Groups. By default, you’re
subscribed to Paging Groups 1, 24, and 25. This means that you can send and receive pages to Paging
Groups 1, 24, and 25.
Sending Pages
By default, when you send a group page, it’s automatically sent to Paging Group 1. This is your default
paging group.
You can change your default paging group to any group you want (see Updating the Default Paging
Group). If you change your default paging group, you’ll need to make sure you’re subscribed to that
group, or else the group won’t be available when you initiate a page. To subscribe to a paging group, see
Updating Paging Group Subscriptions.
To send a page:
1 To send a page, press the Paging soft key. You may need to press the More soft key first.