Filter
Top Products
Polycom OTX 300 User Guide
2–30
Answering Calls
This section describes how to answer video or audio calls that you receive
when in an OTX room.
Answering Video Calls
When you receive a video call, you hear a ringing sound.
To answer a video call:
>> You do not have to do anything to answer the call. The call will be
automatically answered by the OTX.
Answering Audio Calls
When you receive an audio call, you hear a ringing sound and the Touch Panel
automatically displays the Home screen for the Enhanced UI (shown in
Figure 2-2) or the Audio Dial screen for the Classic UI (shown in Figure 2-22)
so that you can easily answer the call.
To answer an audio call:
>> Touch
Dial/Answer.
Controlling Audio
When you place a video call, the audio level defaults to the volume it was set
at the last time the OTX was used. A horizontal bar on the Touch Panel shows
the audio level. You can change the audio in these ways:
• During both video and audio calls, touch
Volume Up or
Volume Down to increase or decrease the sound you hear from the far
end.
• During both video and audio calls, touch Mute to mute or unmute
the sound you are sending from your site.
If the far end is muted, the
Far End Muted icon appears on the Home
screen.