Filter
Top Products
Using the Touch Panel
2–17
Making and Hanging Up Calls Using Meeting Composer
Once you have added the sites you want to call to the Conference List on the
right side of the Meeting Composer screen, you can make the call to those sites
as described in this section.
Making and Hanging Up a Multipoint Call
If your system is configured to use the Polycom RMX, you can make a call to
multiple sites as well as to telepresence sites. You can select up to 30 sites to
dial at once. After the conference has started, you can add additional sites or
drop sites. The maximum number you can add is determined by the available
resources on the Polycom RMX.
Note that if you create a Conference List of only one site and that site is not a
multipoint site or a SIP endpoint, the system will make the call as a
point-to-point call without using the RMX.
To make and hang up a multipoint call:
1 Ensure that the sites listed in the Conference List include all the sites you
want to call:
— If you want to delete a site, simply touch that site’s name in the list.
— If you want to delete all the sites, touch the
Clear button.
— If you want to add another site, refer to Selecting Sites Using Meeting
Composer on page 2-11.
Figure 2-13 Meeting Composer Conference List for a Multipoint Call —
Enhanced UI (Not in a Call)