Filter
Top Products
Upgrading Polycom CX700 Phone within a Microsoft Office Communications Server 2007 R2 Environment
35
Step 3 - Upgrade Polycom CX700 Phones from 1.0.522.101 to 3.5.6907.35
This is the final step in the upgrade process and can be conducted on a one-off
basis or after all Polycom CX700 phones have been upgraded from release
1.0.522.101 to 3.5.6907.35. As in Step 2, you will want download the latest
software updates and use test devices to confirm the update works properly
before approving the build for product distribution.
Step 3.1 - Prepare Software Update Files
There are three basic steps to this process:
1. Download the UCUpdates files and uncompress them to CAB files
2. Upload the CAB files to the pool and uncompress them further to CPE
files
3. Approve the CPE files.
To prepare the software update files:
1. Download the Microsoft Office Communications Server (OCS) 2007
3.5.6907.9 Polycom CX700 phone software release (UCUpdates.exe) here
and store it on a Pool Front End server (for example,
c:\UCUpdates\
6907.9 ).
2. Open a CMD window, change to the directory where you downloaded
the 3.5.6907.9 version of UCUpdates and run the ucupdates.exe file.
Extract the CAB file to a directory (for example, use the same directory
that ucupdates.exe is in).
3. From the Pool Front End server, click Start, Administrative Tools, Office
Communications Server R2.
4. Right-click on the Pool and click Device Updater. Select Tools, Upload
.cab File.
5. Navigate to the directory where you extracted the CAB file (for example,
c:\UCUpdates\6907.9), click on UCUpdates and click Open.
This will extract the 3 CPE.* files from the CAB file and make them
available for Approval / Rollback.