Filter
Top Products
Problem Cause and Remedy
You cannot operate the oThe handset user is operating the
answering system at the answering system, or is engaged in an
base unit. outside call. Wait until the
IN USE/CHARGE/HOLD indicator light
goes out.
You cannot operate the
answering system from a
touch tone phone.
OMake sure you enter the correct remote
code.
oThe answering system may not respond
if the tones are too short to activate the
unit. Press each button firmly.
oThe answering system is off. Turn iton
(p. 63).
You cannot operate the
answering system with the
handset.
oSomeone is operating the answering
system.
eYou are too far from the base unit.
Move closer to the base unit.
oThe unit is recording a message.
To answer the call, press _ or _J.
While recording a greeting oTo answer the call, press _ or 61/.
message, the unit starts to Start again from the beginning after
ring and stops recording, hanging up.
During playback, the unit
starts to ring and stops
playback.
• To answer the call, press !_,l or _.
To resume playback, press
/NEW MESSAGE/SLOW TALK I after
hanging up.