Filter
Top Products
Programmable Functions
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode.
Press IREDIAL/PAUSE/FUNCTION].
<Function menu>*
_ave directory.-], .To store an item in the directory (p. 42).
inger volume ....[.. TO select the ringer volume (p. 19).
rogram _ j
_!r Press EDIT_.
<Function menu>*
_LCD contrast .......
Set flash time,
Set line mode ......
Set dial mode .....
Talk switching,
TAD program ........
....To select the LCD contrast (p. 20).
•.To select the flash time (p. 52).
To select the line mode (p. 16).
To select the dial mode (p. 15).
To set the auto talk feature (p. 18).
.....To program answering system functions (p. 23).
During programming
*To select a desired function item, press _ or _] repeatedly until the
arrow points to the item. Then press EDIT [_-] to go to the next step.
elf the handset displays "No link to base Place on cradle and try
again ." and an alarm tons SOUndS,move closer to the base unitand try again.
*You can exit the programming mode any time by pressing/OFF].
*If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.