Filter
Top Products
J
Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The unit must be in the standby mode before programming.
[
[
Lift the handset, and press R_EDIAL/PAUSE/FUNCTION_].
Press [_ or (_ to select "Program", and press EDiT [_.
I,
Press _ or _ to select "TAD program", and press EDIT _.
elf the handset displays "Ho link to base Place on
cradle and try again." and an alarm tone sounds,
move closer to the base unit and try again.
Press _ or _ to select the desired function, and press EDIT _.
f'Day and time To adjust the day and time (p. 24).
Remote code ..... t TO set the remote code (p. 59).
Number of ring 1 To select the numb,er of rings (p. 27).
Recording time TO select the caller s recording time (p. 26).
When finished setting, press EDIT_ (Save key).
eA beep sounds.
eTo return to the standby mode, press LOLOLOLOLOLOLOLOLOL_.
• To cancel during programming, press <0_!. Start again from the beginning.
elf you do not press any buttons for 60 seconds, the unit will return to the standby
mode.