Filter
Top Products
Battery Replacement
If "Recharge" is displayed and/or "( I ]" flashes after being fully
charged, replace the battery with a new Panasonic P-P504 battery.
To order, call the accessories telephone number on page 2.
Press the notch on the battery
cover firmly and slide it as
indicated by the arrow.
Remove the old battery.
Then install the new one.
olnsert the battery pFug into
the connector as shown in
the picture.
Close the cover. Make sure you charge the new
battery for about 15 hours in order to display the
battery strength prompt correctly (p. 13).
A nickel cadmium battery that is recyclable powers the product
you have purchased. At the end of its useful life, under various
state and local laws, it is illegal to dispose of this battery into _1[ F/_
your municipal waste stream. Please call 1-800-8-BAT-IERY '_[_d_'
for information on how to recycle this battery.
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
Standard
Telephone
Single-Line
Telephone Jack
Felephone
T-Adaptor (KX-J66) Line Cord
69