Filter
Top Products
eln step 7, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter "0100" and seFect "PM" by pressing (_.)
If a power failure occurs; the time may be shifted. When "(_)"
flashes on the base unit display, reprogram the current day/time.
To check the day/time '
Repeat steps 1 to 6 on page 24.
eThe current day/time is heard. When finished, press _.
For Caller ID service users (p.33)
oThe Caller ID information will reset the clock after the first ring if the
adjusted time is incorrect. However, the day will not be re-set by the Caller
ID information. Adjust the correct day by following the steps on page 24.
elf the time has not previously been set, the Caller ID information will not
adjust the clock.
oThe Caller ID information will automatically adjust the clock for daylight
saving time,
2.5