Filter
Top Products
To put a call on hold
Press H_HOLD/INTERCOM/CLEAR_.
O"Hold" is displayed.
oThe IN USE/CHARGE/HOLD indicator on the base
unit flashes.
elf you do not press any key more than 6 minutes,
an alarm tone will sound.
elf you do not press any key more than 10 minutes
after holding a call, a line will be disconnected.
Hold
00-00-08 [111]
To release the hold
Press _ or (_.
elf another phone is connected on the same line (p. 69), you can also release the
hold by lifting its handset.
Backlit LCD display
The lighted handset display will stay on for a few seconds after pressing a
handset button, lifting the handset off the base unit, hanging up a call,
leaving the programming mode or ending the intercom.