Filter
Top Products
=b Special Features
FLASH Button
Pressing FLASH/CALL WAIT/PLAYBACK allows you to use special
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX,
You can select the following flash times: "700,600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)". Your phone comes from the factory set to
"700 ms".
Make sure the unit is in the standby mode,
Press [REDIAL/PAUSE/FUNCTION ].
Press _ or _] repeatedly until the arrow
points to "Program".
Press EDIT_.
Press [_ or _ repeatedly until the arrow
points to "Set flash time".
Press EDIT ['_.
5
Press _ or <_] repeatedly until the
desired time is displayed,
Ringer volume
_Program
Save directory
LCD contrast
_Set flash time
Set line mode
Flash time
:700ms
TA _:Save
Press EDIT_ (Save key).
oA beep sounds.
oTo return to the standby mode, press <OF_
Flash time 1
:ll0ms
• You can exit the programming mode any time by pressing _OFFJ.
elf you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc.). Consult your PBX supplier for the correct
setting.
52