Filter
Top Products
Storing Caller List Information in the
Directory
You can store numbers that are in the Caller List in the directory.
Make sure the unit is in the standby mode.
Lift the handset off the base unit and
press _ or _ to enter the Caller List.
Press _ or (_ repeatedly to find the
caller you want to store in the directory.
Press EDIT(3_.
oil the number requires editing, see page 38.
i0 new calls
TA )=Directory
TURNER,CINDY
1-234-456-7890
II:20A JAN12 ×3
)Edit
Save directory
VA _=Yes
Edit
_Save directory
TA _=Yes
Enter name
4_ Y:Next
Enter name
CINDY TURNER
4_ V-Next
CINDY TURNER
12344567890
A-Edit _=Save
Press _ or _-] to select "Save
directory", and press EDIT [_] (Yes
key).
If there is no name information for the
caller, "Enter name" will be
displayed.
a) If a name is not required, press
(Next key) and EDIT [_ (Save key).
b) If a name is required, enter the name
(p. 43). When finished, press
(Next key) and EDIT [_ (Save key).
oA beep sounds.
•,The display will return to step 2. You can
continue storing other items.
To return to the standby mode, press [O_.
• You can exit the programming mode any time by pressing O_Fj.
elf the display shows "Directory full" in step 3, the display will return to
step 2. Press _ to exit the list. To erase other stored items from the
directory, see page 48.
oYou cannot store caller information in the directory if a phone number is not
displayed.
elf the display shows "Save error" or"No link to base Place on
cradle and try again." in step 3, the item cannot be stored in the directory.
Try again from step 1