Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
7
GETTING STARTED
Set Country
After the phone is fully charged you will need to select your
country. The default setting is Australia.
1. Press the [
] or [ ] button to scroll to the SET
COUNTRYsub-menu.
2. Press the [
] button to enter the menu. SET
COUNTRY1AUSand2NZLshowsinthedisplay.
3. Usethekeypadonthehandsettoselect1or2,oruse
the [
] or [ ] button to scroll to your selection. 1AUS
is the default setting.
4. Press the [
 ] button to confirm.You will hear a
conrmationtone.
Wall Mounting
1. Turn the base over.
2. Attachthewallmountingpedestalbyrstinsertingthe
tabs on the open edge of the pedestal into the slots on
the lower portion of the back of the base. Then push
down and snap the pedestal into place.
3. Slipthemountingholes(onthebackofthebase)over
the wall plate posts, and slide the unit down into place.
(Wall plate not included.)
Note:
If desired, gather the extra telephone line and power
adaptor cord together and store inside the wall mounting
pedestal.
 previous next