6
Base Station
1. Choose an area near a power point and a telephone
wall jack socket, and place your cordless telephone on a
level surface, such as a desktop or tabletop, or you may
mountitonthewallusingthebracketrequired.
2. Plug one end of the telephone line cord into the TEL
LINE jack on the bottom of the base and the other end
into a modular jack.
3. PlugtheACpowerconverterintothepowerpointand
theDC connector into the jackon the bottomofthe
base.
4. Placethehandsetinthebasecradle.Thecharge/inuse
indicator turns on, verifying the battery is charging.
5. Allow the phone to charge for 16 hours prior to first
use.If youdon’tproperly chargethephone, battery
performance will be compromised.
Useonlythemodel5-2760poweradaptorthatcamewith
this unit. Using other power adaptors may damage the
unit.
!
CAUTION
GETTING STARTED