Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
41
4. SelectNO,ifyoudonotwanttode-register.
5. If you select 1YES, press the [
] button and
MOVENEARTO BASE displaysfor2seconds, then
CONFIRM?1YES2NOappearsinthedisplay.
6. Pressthetouch-tonepadtoselect1YESor2NO,oruse
the [
] or [ ]buttontoscrollto1YESor2NO.
7. IfyouselectYES,pressthe[
] button to confirm.
Youwill hearaconfirmationtone.ThenHANDSET X
DEREGISTEREDshowsinthedisplaytoconfirmthe
handset is deregistered.
Note:
Whenyoucompletethede-registrationprocess,
HANDSETNEEDSREGISTRATIONshowsinthedisplay.
Tousethehandset,youMUSTre-registerthehandset
usingtheRegistrationprocess.
Default Setting
As you become familiar with this system, you may prefer to
usethesystem’soriginalsettings.Followthestepsbelow
to return to the factory default settings.
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttontoscrolltotheDEFAULT
SETTINGsub-menu.
2. Press the [
]buttontoenterthemenu.DEFAULT
SETTING1YES2NOshowsinthedisplay.Thedefault
setting is “2NO”.
3. Usethekeypadtoselect1YESor2NO,orusethe[
]
or [ ]buttontomovethecursorto1YESor2NO.
Note:
IfyouchooseYESallthesettingsintheprogrammable
menu are returned to factory default setting.
4. Press the [ ]buttontosaveyourselection.Youwill
hearaconrmationtone.
ADvANCED SETTINGS
 previous next