Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
18
Message Alert (for answering system)
This feature sets your answering system to give an alert
tone every 10 seconds when there are new messages.
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttontoscrolltotheMESSAGE
ALERTsub-menu.
2. Press [
]buttontoenterthemenu.NEWMSG
ALERT1ON2OFFshowsinthedisplay.
3. Usethetouch-tonepadtoentertheselection,oruse
the [
] or [ ] button to scroll to the 1ON or 2OFF. The
default setting is 2OFF.
4. Press the [
 ] button to confirm.You will hear a
confirmation tone and the new setting shows in the
display.
Message Length
ThisfeatureallowstheusertosettheMemorecordingtime
andICMrecordingtime.
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttonstoscrolltotheMESSAGE
LENGTH submenu.
2. Press the [
]buttontoenterthemenu.MESSAGE
LENGTH3MINUTEshowsinthedisplay.
3. Usethe[
] or [ ]buttonstoscrolltoyourselection.“3
MINUTE”isthedefaultsetting.
4. Press the [
]buttontoconrm.
HANDSET SETup
 previous next