Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
19
Rings to Answer (for answering
system)
This feature lets you select the number of times you want
the phone to ring before the answering system answers a
call.
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttontoscrolltotheRINGTO
ANSWERsub-menu.
2. Press [
]buttontoenterthemenu.RINGTO
ANSWER3456TSshowsinthedisplay.
3. Usethe[
] or [ ] button to scroll to your selection.
The default setting is 5.
4. Press the [
 ] button to confirm.You will hear a
confirmation tone and the new setting shows in the
display.
Note:
IfyouselectTollSaver(TS)theunitanswersafterthe3rd
ringifthereareNEWmessages,ORtheunitanswers
after the 5th ring if there are NO new messages. This
allows the user to access their answerer from another
location and then hang up after 4 rings to save long
distance charges.
Security Code (for answering system)
Youcanaccesstheansweringsystemfromatonedialling
telephone in another (remote) location. The security code
isrequiredforremoteaccess,anditpreventsunauthorized
access to your answering system.
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttontoscrolltotheSECURITY
CODEsub-menu.
2. Press [
]buttontoenterthemenu.SECURITY
CODE123showsinthedisplay.
3. Usethekeypadtoenteryournew3-digitsecuritycode.
Thedefaultsettingis123.
4. Press the [
 ] button to confirm.You will hear a
conrmationtoneandthenewsecuritycodeshowsin
the display.
Note:
If you make a mistake, use the
[ ]
button to backspace
and erase the wrong digit.
HANDSET SETup
 previous next