Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
2
WARNINGS AND SAFETY INFORMATION
• Donotuseyourtelephoneduringanelectricalstorm
thunderstorm as it is possible to get an electric shock.
RefertoinformationcontainedinWhitepagesdirectory.
• Thisphone is designed for connection to aPSTN
telephone line or an analogue extension port of a
PBX system. If you connect this device to a digital
extension of a PBX, damage may result to the PBX.
Use only the mains adaptors supplied with this product.
Incorrect adaptor polarity or voltage can seriously
damage the unit.
Adaptor for base unit and Charger:
INPUT:100-240VAC50/60Hz
OUTPUT:7.5VDC500mA
!
CAUTION
General Product Care
To keep your unit working and looking good, follow these
guidelines:
Avoid dropping the handset, as well as other rough •
treatment to the phone.
Clean the phone with a soft cloth.•
Never use cleaning agents, paint thinner, abrasive •
powder, alcohol, or other chemical products to clean the
unit.Doingsowilldamagethenish.
Retaintheoriginalpackagingincaseyouneedtoship•
the phone at a later date.
Note:
It may take some time for the cordless handset to power
up, and it may get warm during chargeing. This is normal.
Tip!
It is good practice to put the cordless handset on the
charging cradle when it is not in use to ensure that the
handset is always fully charged.
 previous next