11
ANSWERING SYSTEM SETup
This section shows you how to set up your answering
system to receive incoming calls. Before you begin the set
up process, you must turn on the answering system.
Pressthe[on/off]buttontoturntheansweringsystem•
onandoff.TheMESSAGESindicatorlightswhenthe
answering system is on. The indicator blinks when you
have new messages.
Note:
Theansweringsystemdisplays“--”whenitisoff.
Setting the Voice Prompt Language
The default voice prompt language is English.
Tochangetheansweringsystem’svoicepromptlanguage,
Press the [ lang ] button on front of base to change •
to the FRENCH voice prompt.The unit announces
“OPTIONFRANCAISE”andFrshowsinthemessage
counter.
Press the [ lang ] button again to change to the •
SPA NISH vo ice pr ompt . Th e uni t a nnou nces
“SELECCION ESPANOL” and SP shows in the message
counter.
Note:
To change to English, press the [LANGUAGE] button again
Note:
In remote access mode, the system follows the selected
language. The voice prompt language cannot be switched
remotely
Voice Time/Day Stamp and Real Time
Clock
1. MakesuretheansweringsystemisON.
2. Pressandholdthe[day/check]buttontosetthedayof
the week.
3. Pressandholdthe[hour]buttontosetthehour(a.m.
orp.m.).Example:12AM,1AM,or12PM,1PM.
4. Press and release the [ min ] button to advance the
clock in one minute intervals. Press and hold to increase
by5-minuteincrements.
5. After the time is set, the real time clock will be displayed
on the handset within 1 minute.
Note:
Youmustsetthedaymanually.Youmaychoosetosetthe
time manually as well, although the time is automatically
transmitted by your local phone company as part of
CallerIDservice.IfyousubscribetoCallerIDservice,the
current time is set automatically when you receive your
rstCIDrecord