Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
15
HANDSET SETup
Ringer Tone
Youmaychoosefromten different ringertonesandten
different melodies.
FromtheHandsetSetupMenu:
1. Press the [
▼
] or [
▲
]buttontoscrolltotheRINGER
TONEsub-menu.
2. Press [
]buttontoenterthemenu.SETRINGER
TONE 01 shows in the display. 01 is default setting.
3. Use the[
▼
] or [
▲
] button to scroll to the desired
setting (1through 20).Youwillhear asample ofthe
ringertone/melodyyouselect.
4. Press the [
]buttontosaveyourselection.Youwill
hear a confirmation tone and the selected ringer tone
shows in the display.
Note:
YoumusthavetheRingerVolumesettoONforringtone
to signal an incoming call.
Ringer Volume
FromtheHandsetSetupMenu:
1. Press the [
▼
] or [
▲
]buttontoscrolltotheRINGER
VOLUMEsub-menu.
2. Press [
]buttontoenterthemenu.SETRINGER1HI
2LOW3OFFshowsinthedisplay.
3. Usethekeypadonthehandsettoselect1,2or3,or
use the [
▼
] or [
▲
] button to scroll to your selection. HI
is the default setting.
4. Press the [
]buttontosaveyourselection.Youwill
hearaconrmationtone.
Note:
If you turn the ringer OFF, the ringer off icon shows in the
display.
 previous next