Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
14
HANDSET SETup
Handset Setup
1. MakesureyourphoneisOFF(notintalkmode).
2. Press the [
] button to go to the main menu.
3. Pressthe[
▼
] or [
▲
]buttontoscrolltoHANDSET
SETUP.
4. Press [
]buttontoconrmandyoumayprogramthe
following items:
SET LANGUAGE, HANDSET NAME, RINGERTONE,
RINGERVOLUME,VIPMELODY,KEYTONE,AUTO
ANSWER,MESSAGEALERT,MESSAGELENGTH,RING
TO ANSWER, SECURITY CODE, RECALL TIME,
REGISTRATION,DEREGISTRATION,SETCOUNTRY
andDEFAULTSETTING.
Duringprogramming,youmaypressthe[
] button at
anytimetoexitthemenuandreturntothesub-menu.
Language
FromtheHandsetSetupMenu:
1. Press the [
] or [ ] button to scroll to the SET
LANGUAGEsub-menu.
2. Press the [
] button to enter the menu. SET
LANGUAGE1ENG2FRA3ESPshowsinthedisplay.
3. Usethekeypadonthehandsettoselect1ENG,2FRA,
3ESP,orusethe[ ] or [ ] button to scroll to the
desired language. English is the default setting.
4. Press the [
]buttontosaveyourselection.Youwill
hear a confirmation tone and the selected language
shows in the display.
Handset Name
FromtheHandsetSetupMenu:
1. Press the [
] or [ ]buttontoscrolltotheHANDSET
NAMEsub-menu.
2. Press [
]buttontoenterthemenu.HANDSETNAME
shows in the display.
3. Usethekeypadtoenteraname(upto15characters).
More thanoneletterisstoredineachofthenumber
keys.
Note:
If you make a mistake, use the
[ ]
button to backspace
and delete one character at a time.
4. Press the [ ]buttontosaveyourname.Youwillhear
aconrmationtoneandthehandsetnameshowsinthe
display.
 previous next