Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
25
Two-Way Calling
1. Duringanexternalcall,presstheint/conf[ ] button,
and use the keypad to enter the handset number you
want to call.
Note:
Thereceivinghandsetpressestheint/conf
[ ]
button to
answer the intercom call. Both intercom users may speak
privately. The external caller will not hear the intercom
conversation.
2. When finished, press the [ ] button or [ ] button
to end the intercom call, return to the talk mode, and
resume your original telephone conversation.
Three-Way Conference Calling
1. Duringanexternalcall,presstheint/conf[ ] button.
LINEONHOLDEXTENSION?showsinthedisplay.
2. Usethe keypadto select Handset #.You will hear a
paging tone and PAGING shows in the originating
handset’sdisplay.
Note:
PAGINGFROM...showsinthedisplayonthereceiving
handset,andthereceivinghandsetpressestheint/conf
[ ]
or
[ ]
button to answer the intercom.
3. Whenthereceivinghandsetconnects,presstheint/conf
[ ] button on the originating handset to conference
with the receiving handset and the external caller.
CONFERENCEshowsinthedisplayontheoriginating
and receiving handsets.
Note:
A handset can enter conference mode directly by pressing
[ ]
on the second handset during a call.
WARNING:
Duringaconferencecallinvolvingthebasespeakerphoneand
a cordless handset, avoid bringing the handset close to the
speakerphone because of the possibility of acoustic feedback
causing unwanted annoyance.
TELEpHONE OpERATION
 previous next