Oricom 9800 Cordless Telephone User Manual


  Open as PDF
of 48
 
30
pHONE BOOk
Eachhandsetcanstoreuptoftyrecordsinphonebook
forquickdialling,eachrecordcancontainamaximumof
20-digitnumbersand15-characternames.
View Records
1. MakesurethephoneisOFF(notintalkmode).
2. Press the [
]buttontoaccessthephonebooksub-
menu.
3. Use the [
] or [ ] buttons to scroll to VIEW
RECORDS.
4. Press the [
]buttontoconrm.Displaywillshowthe
records.
5. Press the [
] or [ ] buttons or key in alphabet to view
the records.
6. Press the [
] button to confirm and the detailed
information will be shown in the display.
Add Records
1. MakesurethephoneisOFF(notintalkmode).
2. Press [
]buttontoenterPhoneBooksub-menu.
3. Usethe[
] or [ ]buttonstoselectADDRECORDS.
4. Press the [
]buttontoconrm,ENTERNAMEshows
on the display.
5. Use thetouch-tone pad to enter a name (up to15
characters).Morethanoneletterisstoredineachofthe
number keys.
Note:
If you make a mistake press the
[ ]
button to backspace
and erase the wrong character(s) or number(s).
6. Press the [ ] button again to save your selection. The
displayshowsADDTELNUMBER.
7. Use the keypad to enter the telephone number (up to
20 digits, including pauses), and press the [
] button
toconrm,Therecordsarestoredalphabeticallyinthe
phone book.
InsertingaPauseintheDiallingSequence(ofaStored
Number)
Press the [
]buttononthehandset’skeypadtoinserta
delayindiallingsequencewhenapauseisneededtowait
for a dial tone (for example, after you dial 0 for an outside
line, or to wait for a computer access tone.) Each pause
countsasonedigitinthedialingsequence.
 previous next