Filter
Top Products
5-2 Setting Up a Remote Connection
Preparing for a Connection Setup
Before you set up a dial-up connection for an Internet Service Provider
(ISP) or Remote Access Server (RAS), and the associated e-mail
properties, you need the following:
! Modem (your NEC MobilePro is equipped with an internal data/fax
modem)
! ISP or RAS account
! Configuration information from your ISP or network administrator
that may include some or all of the following:
— Dial-up telephone number
— TCP/IP settings
— Port settings
— User name and password, if required.
You must create a new connection for each ISP or RAS account that
you want to establish. Once you have created a connection for an ISP,
RAS, etc., you can define an e-mail account for each connection, if so
desired. Follow the instructions in the sections that follow,
“Connecting to an ISP,” “Connecting to a RAS,” and “Sending and
Receiving E-mail,” to create the desired connections.
Connecting the Internal Modem
Follow these steps to connect an RJ-11 telephone cable to the internal
modem.
1. Open the modem cover on the left side of the NEC MobilePro by
pulling out the left side of the cover.
2. Carefully plug the RJ-11 telephone cable into the modem
connector.